Thoroughly clean the application area with alcohol swaps (included in the package) or 3M Prep Solvent 70* to remove any traces of silicone treatments or dirt. Repeat the cleaning process using a clean , lint-free cloth as many times as necessary to remove every trace of dirt or protectant.

Dry-fit each dash trim piece, note correct placement, and use a pencil to outline the pieces for placement reference.

Carefully apply 3M™ Adhesive Promoter (included in a package) to all surfaces that will be covered by dash trim.

Gently heat the trim parts with a heat gun, or by placing the kit pieces (tape liner side down) on top of the defroster with the setting on medium to high.

Begin peeling back the liner of dash trim part before applying the part. Handle parts from edges to avoid finger contact with the adhesive.

Carefully position the part and peel off the remaining liner.

Thoroughly press down on the entire surface of the part to ensure complete wet-out of the adhesive to the surface.

Properly installed, dash trim adds a distinctive touch of class to the vehicle. Enjoy our product

*While we don't recommend another product specifically by name for cleaning your dash, you can use a chemical equivalent cleaner recommended by your local auto paint store.  So long as the cleaner is a chemical equivalent, meaning the same active chemicals in the alternative are found in 3M Prep Solvent 70.  VIPTrims does not sell 3M Prep Solvent 70 directly, however, you can purchase the cleaner at 3M's online web site at 3M Prep Solvent 70.